| Wall Paneling--Fire Testing |
| |
Fire Resistance
|
| |
Material Flammability
|
| |
Fire Technology Department
|
 |
| Wallcovering Test |
|
| ASTM E 84, US 1715, UL C102.2 (Canada) |
|
| |
Vice President's Office
|
| |
Fire Technology Department
|
|
| Warhead Modeling |
| |
Engineering Dynamics Department
|
| |
Computational Mechanics
|
|
| Waste Destruction |
| |
Chemical Defense
|
|
| Waste Minimization |
|
| Perform engineering assessments of industrial processes to identify potential technologies or pollution prevention practices that could be implemented for the purpose of reducing the amounts of waste generated, and lowering the toxicity and persistence of those wastes being generated. |
|
| |
Vice President's Office
|
| |
Environmental Engineering and Monitoring
|
| |
Lube Prof Administrative Staff
|
|
| Waste Treatment |
| |
Vice President's Office
|
| |
Department of Electromechanical and Optical Systems
|
|
| Wastewater Treatment |
|
| Perform engineering evaluations of wastewater treatment systems (physical, chemical, or biological) to improve treatment efficiency or to meet EPA or state discharge permits. |
|
| |
Environmental Engineering and Monitoring
|
| |
Department of Electromechanical and Optical Systems
|
|
| Water Jet Cutting |
| |
Applied Physics Division
|
| |
Department of Electromechanical and Optical Systems
|
| |
Department of Electronics Systems and Robotics
|
| |
Department of Space Systems
|
|
| Water Quality Sampling |
|
| Testing water samples (biological, environmental monitoring) |
|
| |
Department of Engineering Applications and Systems Development
|
|
| Water Testing |
| |
Vice President's Office
|
| |
Environmental Engineering and Monitoring
|
| |
Department of Electromechanical and Optical Systems
|
|
| Water Testing for Lead |
| |
Analytical and Environmental Chemistry Department
|
| |
Inorganics/Radiochemistry
|
|
| Weapon Reliability |
|
| Weapon Reliability |
|
| |
Materials Engineering Department
|
|
| Weapon Vulnerability |
|
| Weapon Vulnerability |
|
| |
Materials Engineering Department
|
|
| Weapons Effectiveness |
|
| Weapons Effectiveness |
|
| |
Materials Engineering Department
|
|
| Wear Measurement |
|
| Wear tests show the ability of the oil to prevent wear. Some of our wear tests are ASTM D 4172, ASTM D 2266, ASTM D 2783, ASTM D 2596, and ASTM D 3233. |
|
| |
Engine, Emissions and Vehicle Research Division
|
| |
Medium Speed Diesel Engine Section
|
| |
Powertrain Design & Analysis
|
| |
Fuels and Lubricants Research Division
|
| |
Lube Prof Administrative Staff
|
| |
Filtration and Fine Particle Technology
|
| |
Surface Engineering and Materials Chemistry Section
|
| |
Corrosion Science and Process Engineering
|
|
| Wear Metal Analysis |
|
| Wear Metal Analysis is the the study of debris from a lubricated system to determine the current and past health of that system |
|
| |
Chemical Defense
|
| |
Chemical Engineering Department
|
| |
Lube Prof Administrative Staff
|
| |
Ballistics and Explosives Range
|
| |
Materials Engineering Department
|
|
| Weather Modeling |
|
| Development and application of computer codes for modeling of weather including the lower atmosphere (mesoscale models) and upper atmosphere (global circulation models for 50 km and above). |
|
| |
Training, Simulation and Performance Improvement Division
|
| |
Engineering Dynamics Department
|
| |
Computational Mechanics
|
|
| Weather Monitoring |
| |
Chemical Defense
|
|
| Web Consulting |
|
| Web site design, marketing, etc. |
|
| |
Web Consulting
|
|
| Web-Based Applications |
| |
Contract & Administration
|
| |
Enterprise & Emerging Technologies (O'Fallon)
|
| |
Aerospace Systems Engineering
|
| |
Earth and Planetary Sciences
|
| |
Employee Development
|
|
| Web-Based Training |
| |
Contract & Administration
|
|
| Weld Fatigue |
|
| Weld Fatigue |
|
| |
Mechanics and Materials Section
|
|
| Weld Nondestructive Testing |
|
| Inspection of welds for defects such as inclusions, lack of fusion, lack of penetration, and voids. |
|
| |
Applied Physics Division
|
| |
Sensor Systems and Nondestructive Evaluation (NDE) Technology
|
|
| Welded Fabrication |
|
| Welded Fabrication is primarily associated with pressure vessels and test fixturing |
|
| |
Marine Structures and Engineering
|
|
| WEST (Program) |
| |
Training, Simulation and Performance Improvement Division
|
|
| Wet Chemistry |
| |
Analytical and Environmental Chemistry Department
|
| |
Inorganics/Radiochemistry
|
| |
Environmental Engineering and Monitoring
|
| |
Lube Prof Administrative Staff
|
|
| Wet Gas Flow Measurement |
| |
Fluid Dynamics and Multiphase Flow
|
|
| Wind Engineering |
| |
Fluids and Machinery Engineering Department
|
|
| Simulations of local and regional wind conditions for use in the development and sighting of wind turbines. |
|
| |
Planetary Atmospheres Section
|
|
| Window/Door Certification Testing |
|
| Fire, Structural,Ballistics and Explosion Testing performed to ASTM, IMO, NFPA, UL
and other recognized standards for the purpose of obtaining building code and/or
SOLAS and IMO approval. Listing and Labeling services with third-party inspections
are also available. |
|
| |
Listing, Labeling, and Follow-Up Inspections
|
| |
Engineering and Research
|
| |
Lube Prof Administrative Staff
|
|
| Window/Door Certification--Explosion/Ballistics |
|
| Ballistics and Explosion Testing performed to recognized standards for the purpose of obtaining building code approval. Listing and labeling services with third-party inspections are also available. |
|
| |
Ballistics and Explosives Range
|
|
| Window/Door Certification--Fire |
|
| "Fire Testing performed to ASTM, IMO, NFPA, UL, and other recognized standards for the purpose of obtaining building code and/or
SOLAS and IMO approval. Listing and Labeling services with third-party inspections
are also available. |
|
| |
Fire Resistance
|
|
| Windows for Computer Displays |
| |
Avionics and Support Systems Department
|
| |
Aerospace Systems Engineering
|
| |
Automation and Data Systems Division
|
|
| Wireless Communications |
| |
Communications and Embedded Systems Department
|
| |
System Security and High Reliability Software
|
| |
Network-Centric Systems
|
| |
Intelligent Vehicle Systems and Networks Section
|
| |
Office of the Director
|
|
| Wireless LANs |
| |
Aerospace Systems Engineering
|
| |
System Security and High Reliability Software
|
| |
Network-Centric Systems
|
| |
Intelligent Vehicle Systems and Networks Section
|
|
| Wireless Network Technology |
| |
Aerospace Systems Engineering
|
| |
System Security and High Reliability Software
|
| |
Network-Centric Systems
|
| |
Intelligent Vehicle Systems and Networks Section
|
|
| Worker Exposure--Volatile Organic/Shipbrd |
| |
Environmental Engineering and Monitoring
|
| |
Fluids and Machinery Engineering Department
|
| |
Fluids and Machinery Engineering Department
|
|
| Workplace Monitoring |
|
| Perform workplace surveys (area air sampling and personnel monitoring) to determine employee occupational exposures to chemicals (dusts, vapors, aerosols). Includes inhalation exposures to airborne chemicals and dermal exposures. |
|
| |
Vice President's Office
|
| |
Environmental Engineering and Monitoring
|
|
| Wound Healing |
| |
Biomedical Engineering
|
|